Sliding gates are getting increasingly popular, especially on sites where there’s limited space for swing gates to work freely and where higher security is required. Often, sliding gates form one a part of an integrated perimeter system that has fencing and other security measures like access control and surveillance.

There is a growing preference for automated gates, chosen for his or her efficiency and simple handling also like their versatility: today, electric sliding gates are widely specified for residential, education, transport, military, commercial, warehousing, utility, and high-risk sites.

Specifying sliding gates may be a multifaceted process and specifiers got to consider the characteristics of the 2 commonest sorts of the sliding gate: tracked and cantilever.


Tracked sliding gates line a hard and fast track, upon which the bulk of the gate’s weight is carried on wheels. The track is installed alongside the opening, running at the bottom of the gate, and therefore the gate itself typically features automated operation. Tracked sliding gates are often of single, paired-leaf, or telescopic design.

A key advantage of tracked sliding gates is that they’re space-efficient and suitable for sites where there’s restricted space beyond the gate. they’re suitable for top and heavy gate designs and may span very wide openings. they will have a lower profile from the bottom too.

Tracked sliding gates provide strong security as they’re difficult to force open and therefore the few vulnerable points of their structure are hard to access. thanks to their robust design, they’re extremely reliable in adverse weather, including wind. Furthermore, these sorts of gates are mechanically simpler than cantilever sliding gates.

Specifiers should take into consideration that tracked sliding gates require a better level of maintenance. so as for the gate to figure also because it should, the track must be maintained, regularly cleaned, and clear from debris. they’re also unsuitable for sites with uneven ground.


A cantilever sliding gate design is counterbalanced and thus doesn’t require a track to line with the opening. this sort of gate is supported on post-mounted rollers that slide during a tubular track fitted to the rock bottom of the gate. Guide rollers at the highest also enable movement of the gate. This gate design is often of single- or paired-leaf design to span.

The cantilever design is an efficient solution for sites where there isn’t enough space to accommodate swing gates. it’s also ideal for locations where the gates span uneven ground, or where the bottom slopes upwards behind the gate opening. Small cantilever gates are available for pedestrian access where vehicular entry isn’t required.

Suitable for wide openings, these gates are easier to put in, since no groundwork is required for laying a track. They also demand lighter maintenance as there’s no got to keep the world beneath the gate beyond debris. Cantilever gates tend to be less costly than tracked sliding gates and that they have a quieter operation.

Perhaps the sole disadvantage to cantilever sliding gates is that the general length of the gate is going to be greater than the gap it might span on your site; this enables for the counterbalance on the trailing end of the gate.

Leave a Reply

Your email address will not be published. Required fields are marked *